I am looking for an expandable rubber oscillating spindle sander cylinder that you use sanding sleeves on. I need one 9" (or longer) in length and 3" or 4" diameter. And some sanding sleeves in various grits. Does anyone know a source for this ?
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| I need an oscillating sander part http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=2776 |
Page 1 of 1 |
| Author: | Brazilwood [ Tue Aug 09, 2005 2:12 pm ] |
| Post subject: | |
I am looking for an expandable rubber oscillating spindle sander cylinder that you use sanding sleeves on. I need one 9" (or longer) in length and 3" or 4" diameter. And some sanding sleeves in various grits. Does anyone know a source for this ?
|
|
| Author: | Jason [ Tue Aug 09, 2005 5:41 pm ] |
| Post subject: | |
Grizzly has sleeves.. www.grizzly.com |
|
| Author: | Brazilwood [ Wed Aug 10, 2005 1:01 am ] |
| Post subject: | |
Thanks Jason..I tried Grizzlys site but, they only offer the sleeves. I found a company on the internet last night that has the rubber spindle but, I'm waiting for a response if they can ship to Brazil. Many companies don't ship to here. It's a real problem sometimes. But, thanks again. |
|
| Author: | Pwoolson [ Wed Aug 10, 2005 1:12 am ] |
| Post subject: | |
You might also try Klingspore's woodworking shop. I know they have some of the spindles but not sure what you need. No idea if they ship to Brazil or not. |
|
| Author: | crazymanmichael [ Wed Aug 10, 2005 1:50 am ] |
| Post subject: | |
a nine inch spindle is a biggie. what brand sander is it or are you building one? if you can't get the vendor to ship i could onship for you. would entail extra cost but if you have to have it... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|